Eyela FDU-2110 Freeze Dryer
Product Advantages
- 3L unit type dryer for small samples at -80℃, Vacuum rate, trap temperature and operation time are simultaneously displayed on control panel and operation condition can be confirmed at a glance.
- During auto mode operation, trap cooling temperature and vacuum rate are measured and indicates sample vessel mounting possibility.
- Simple operation procedure requires only.
- Timer function is provided in order to record the pump operation time & hence prepare for pump oil replacement.
Product Details
Specification:
Model: FDU-2110
Cold trap temperature: -80℃
Ice holding capacity: 3L/one batch
Temp. setting & display: Sheet key input & digital display
Safety functions: Leak/overcurrent breaker, Control board self diagnosis, Automatic leak at vacuum release, Refrigerator protection circuit
Other functions: Vacuum pump automatic operation function, Monitoring function of vacuum rate and trap temp.
Vacuum leak function: Auto-leak at power OFF or at power failure
Refrigerator & refrigerant: Air cooling, 500Wx2 R404A.R23
Vacuum pump: Optional (over 100/120L/min) (50/60Hz)
Trap dimensions (mm) & material: 200 x 300H SUS 304
Vacuum display: Digital display, 0.0~533.0Pa
Recorder outlet: 1℃/mV 1Pa/mV
Overall dimensions (mm): 700W x 550D x 935H
Weight: 140kg
Product Detail:
3L unit type dryer for small samples at -80℃, Vacuum rate, trap temperature and operation time are simultaneously displayed on control panel and operation condition can be confirmed at a glance.
During auto mode operation, trap cooling temperature and vacuum rate are measured and indicates sample vessel mounting possibility.
Simple operation procedure requires only.
Timer function is provided in order to record the pump operation time & hence prepare for pump oil replacement.
Time setting for continued operation or stop is possible depending on the required time from power failure to return.
Service outlet prevents vacuum pump from auto restarting after recovery from power failure. It prevents melted samples from bumping and dispersing.
0.2㎛ filter is equipped at air inlet to prevent sample contamination.
Trap temperature and vacuum rate signal can be collected by signal data outlet for dry freezing data management.
Vacuum pump can be placed inside main unit.
Wide Variety of Sample container, Manifolds & Tray dryer are available for this model.
Pre-freezing chamber is available upon request.
Hong Kong Labware Co. Ltd is the sole distributor of Rocker’s product in HK & Macau.
Accessories, other sizes or models are available. For detail, please contact HK Labware or visit to www.eyela.co.jp